Clean System Standart Rubber insert

System mats with rubber cleaning inserts embedded in aluminum profiles.

Aluminum mats connected with stainless steel cables.

Designed for entrances with heavy pedestrian traffic, as well as manual transport and shopping cart traffic (height 22 mm and 27 mm).

These facility mats are characterized by high mechanical strength and resistance to moisture, corrosion, and temperature changes.

Application	outdoors and indoors from -40°C to +70°C
Height	12 mm 17 mm 22 mm 27 mm
Dimensions	we produce aluminum wipers to order
Colors	• black• gray• brown
Certificates and approvals	• PZH certificate HK/B/0628/01/2014 – system mats• ITB opinion NJ-5/KR/1106/09 – inlet mats• Material test reports: 48/09/BB91133001 and 10/11/BB91104001• Anti-slip class R 11 according to DIN 51130:2014-02 – aluminum mats• Flammability class Cfl -s1 – facility mats
Installation	• in a recess of appropriate depth• on the floor in a profiled aluminum frame
Operation and maintenance	CLEAN SYSTEM mats are resistant to:• table salt• snow melters• basic non-chlorine chemicalsCleaning: Roll up the mat, sweep or vacuum the debris, mop the floor, and unroll the mat in the same spot. The mat itself should be vacuumed regularly and periodically wet cleaned using carpet cleaning equipment (extractors). Only chemicals that do not damage rubber or aluminum are permitted.Cleaning frequency: We recommend once every two weeks or more frequently depending on soiling and the amount of rain and snowfall. Permissible load: 2500 kg/m² for aluminum mats placed in the groove (unlimited load for pedestrians or wheelchairs, wheelchairs, lifts, and passenger cars with a maximum weight of 150 kg/wheel or 600 kg for wheelchairs).Proper operation of the slatted mats depends on their placement in an even groove. The depth tolerance is approximately 2 mm. If the floor under the mat is uneven, this may result in irreversible deformation of the structural profiles.

More info about Products:

Cart

Log in