Switchboard Matting™ Class 1 833 Notrax insulated mats electrical safety Black

Product description

Insulating matting prevents workers from being “grounded” and provides safety in case of electrical shock.

Product Features

• Each square inch of matting is tested in conformance with ANSI/ASTM D-178 specifications
• The corrugated saw-tooth top surface provides increased traction and is easy to sweep clean
• Must be replaced every 12 months for optimum safety
• Recommended maximum usage: 7,500 Volts

Product description

Insulating matting prevents workers from being “grounded” and provides safety in case of electrical shock. Switchboard mats can be used in front of high voltage boxes, fuse boxes, transformers, electric substations, transformers engine and generator rooms. The corrugated saw-tooth top surface increases traction and is easy to sweep clean. Each square inch of matting is tested in conformance with ANSI/ASTM D-178 specifications. Must be replaced every 12 months for optimum safety. Class 1 - Dielectric Strength: 10,000 V. Proof Test: 10,000 Volts. Recommended maximum usage: 7,500 Volts. V-Groove surface pattern: Height of stripes 1.4 mm Spacing between the stripes 3.4 mm

Selling Points

• Thickness: 4.7 mm
• Heavy duty
• Corrugated rib patter for traction
• Recommended maximum usage: 7,500 Volts
• Available per linear meter in 91 cm width

Cleaning and Maintenance

Sweep regularly or dry mop the surface and the back of the mat. The surface can be damp-mopped with a mild soap/detergent.